Compare levels: -2.5V 7.5V (one setting for all eight capture channels).

 Minimum detectable pulse width of 2.5ns.

 1 GHz master oscillator

 Compare strobe: Single timeset

 6 programmable power supplies

 Clock Sources: Superclock, external input, and the Utility pin.

 Highest frequency: 200MHz.

 Fastest sampling rate: 200 M samples /second.

 Lowest rate: 955Hz for Superclock.

 Compare levels: -2.5V 7.5V (one setting for all eight capture channels).

 Offset Voltage: +/- 6V into 50 ohms, +/- 12V open circuit.

 Maximum Sampling Frequency: 250MHz (AWG1a)

 Bandwidth: 500MHz.

 Presents a 50 Ohm load to the DUT.

 Sampling Rate

 one channel: one sample per channel every 100ns (10MHz).

 two channels: one sample per channel every 200ns (5MHz).

 three channels: one sample per channel every 300ns (3.333MHz).

 four channels: one sample per channel every 400ns (2.5MHz).

 one channel: one sample per channel every 1.0465ms (954Hz).

 Using equivalent time, the ACP can sample every 62.5 Pico seconds (16GHz).

 Equivalent time requires that the test waveform is repeatable.

 input voltage: Each channel has a differential input.

 max voltage per input: +/-1.25V (other input tied to ground).

 min voltage per input: +/-14mv (other input tied to ground).

 +/-2.25V (maximum voltage difference between inputs before clipping will occur)

 +/-1.024V (per input).